Skip links


K-Rend K1 Spray 25kg

K1 Spray can be used with most render spray machines. It is ideal for larger projects where the speed of machine application can offer time saving benefits. Suitable for hand application also.

Product Data

K-Rend Silicone FT 25Kg

K Rend Silicone FT incorporates silicone technology and provides a fine texture finish. Ideal for Hand application.

Product Data

K-Rend Silicone K1 25Kg

Silicone K1 incorporates silicone technology. It is suitable for use with most render spray machines and larger projects where the speed of machine application can offer time saving benefits. Also suitable for hand application.

Product Data

K-Rend Silicone Thin Coat 25Kg (Bucket)

Silicone TC 15 is a ready to use organic resin render which is applied to provide a low maintenance textured finish. It is available in different textures and a wide variety of colours. Prior to application the substrate should be primed using Primer TC.

Silicone TC benefits include:

  • Adds insulating properties
  • Excellent handling properties
  • Allows substrate to breathe
Product Data

K-Rend Silicone Thin Coat Primer 15Kg (Bucket)

Primer TC is a low odour, ready to use primer which is quick and easy to apply by brush, roller or spray. It is available in a wide range of colours which are co-ordinated to the colour of the Silicone TC topcoat. Primer TC should be used after the application of K Rend Base Coat (Scratch Coat) and before Silicone TC.

Product Data

EWI Store Silicone Silicate 25Kg (Bucket)

EWI-040 Silicone Silicate Render is our most popular coloured through top coat. The render is breathable, flexible, hydrophobic and self-cleaning. Although this silicone silicate render is often used as the final stage of EWI Pro external wall insulation systems, it can be used as a standalone top coat render, provided the reinforcement layer is used too – it is available in hundreds of different colours.

  • Water repelling
  • Frost-proof
  • High elasticity
  • High vapour permeability
  • Resistant to UV rays
  • Available in 4 different grain sizes

The product is a decorative, ready-to-use silicone silicate thin-coat render. EWI-040 Silicone Silicate render is available in either 1.0mm, 1.5mm, 2.0mm and 3.0mm grain sizes and is available in 100’s of different colours.

The through colour silicone silicate render is suitable for interior or exterior surfaces, but works best when applied on top of a reinforcement layer as part of the whole thin-coat render or insulation system.

The silicone silicate render not only provides a decorative finish, it also provides a strong protective coating to the property, helping protect the underlying brickwork. Silicone silicate render is also breathable, so can be used in conjunction with mineral wool EWI systems.

EWI Store Silicone Render 25KG (Bucket)

EWI-075 Silicone Render is the premium render in the EWI Pro catalogue, offering unsurpassed performance. It is breathable, and therefore ideal for mineral wool systems. Silicone render is also flexible, making it robust and long-lasting. It is also available in hundreds of different colours, so everyone can be catered for.

  • Weatherproof
  • Resistant to algae and plant growth
  • Frost-proof
  • Hydrophobic
  • Vapour-permeable
  • Self-cleaning

EWI-075 Silicone Render is a ready-to-use render suitable for use on brick, concrete, traditional plasters, gypsum substrates and chipboard. The render is a mixture of silicone and acrylic resins, with mineral fillers and pigments.

This product does not contain ammonia or organic solvents.

It is suitable for interior and exterior surfaces.

EWI Store Mono Scratch Render 25Kg

EWI-090 Monocouche Scratch render is a decorative render that can be hand applied or applied by spray machine. The monocouche render comes as a dry mix, so it requires mixing with water (5.5 litres) prior to application.

EWI monocouche render should have a minimum life expectancy of 10 years when applied correctly – not only does it enhance the look of the property, it also provides a long lasting weatherproof barrier. Once installed, our monocouche scratch render is virtually maintenance free.

The render is available in 18 incredible colours and the product is suitable for both new-build and refurbishment projects.

Cembrit PB Render Carrier Board

Cembrit PB is lightweight and easy to cut and lift. Mechanical cutting is not required. Reinforced, tapered edges facilitate butt jointed fixing for a stable, crack free base making Cembrit PB popular for external decorative rendering, brick slips or stone slip cladding. Cembrit PB can also be used as an element within internal fire rated partition walls and ceilings.

Product Data

Aged External Wall Insulation – EPS

Expandable polystyrene boards are used as part of a render system to provide an efficient and cost effective solution.

Kay-Metzeler external wall insulation is an accepted way of improving the thermal value to the outer face of most external walls.

Kay-Metzeler external wall insulation when used on the external face of a masonry wall maximises the natural thermal capacity of the wall and assists in the reduction of thermal fluctuations.

Uninsulated walls are one of the largest heat loss areas within a buildings construction, external wall insulation therefore offers a cost effective solution to reducing your carbon footprint, protecting the environment and saving the household money on their heating bills.

Kay-Metzeler offer various bespoke grades for thermal wall insulation; grades such as Kay-Cel Super Plus which is a black, low thermal valued board, plus EPS 70E and EPS 300E grade all containing a fire retardant additive. Thermal values ranging from 0.038 to 0.031 W/mk. Low Pentane grades of EPS raw material are used for external wall applications to minimise any board movement.

Product Data

Kingspan Kooltherm K5 External Wall Insulation

Kingspan Kooltherm K5 External Wall Board is an external insulation for masonry walls.

A premium performance insulation with a fibre-free rigid thermoset phenolic core, it is suitable for use behind traditional and lightweight polymer modified renders and dry cladding systems.

Depending on the insulation thickness, Kingspan Kooltherm K5 External Wall Board provides a thermal conductivity between 0.020 W/m·K and 0.023 W/m·K.

Product Data

Insulation Anchors/ Pins

We supply a large verity of insulation anchors for mechanically fixing external wall insulation to masonry substrates. Sizes from 8mm – 10mm Diameter and 75mm – 260mm Length.